Home / Products / Solar Panel Frame Machine / Hydraulic Solar Panel Frame Machine / Customized Solar Module Framing Machines with Hydraulic Punching

Customized Solar Module Framing Machines with Hydraulic Punching

The solar panel framing machine is suitable for assembling frames of various sizes.

Production Description

The solar panel framing machine is suitable for assembling frames of various sizes. The working range can be customized.
There two assembly options available: hydraulic punching and pneumatic framing.

Parameter

Operation Mode	Manual operation, Manual put solar panel with frame, automatic clamping for corner and frame , hydraulic punching fixed corners
Encapsulation mode	Single, double molecular sealant and Roman tape extrusion, positioning, sealing, assembly angle
Maximum frame size (4 corners)	2600×1500×30～50 mm
Minimum frame size (4 corners)	600×600×30~50 mm (need remove support and long side frame)
Set Angle frame precision	Group box two straight edge error within 0.5mm (the same size of the border)
	Box diagonal: within 1.0mm (same border size)
	Error: 0.5 degree (same border size)
Air supply requirements	Air Pressure: 0.5~1.0MPa Air Flow:100L/M
Hydraulic Pressure	1.0~15Mpa(Punching pressure can be adjusted), Hydraulic oil:30L
Power supply requirements	AC 380/50HZ/ Three-phase five line
Total Power	1.5KW
Dimension of equipment	3600mm×2400mm×950mm
Weight	1750Kg

Certification

downLoadImg

Contact

Related Products